1. Exhaust lampblack and waste gas

排煙設備捕捉并排除廚房設備產生的全部油煙、蒸汽、廢氣，保證油煙熱氣不外溢，帶走部分廚房設備產生的多余熱童。

Smoke exhaust equipment captures and removes all lampblack, steam and waste gas generated by kitchen equipment to ensure that lampblack and hot gas do not spill out and take away excess hot children generated by some kitchen equipment.

2、合理補充新風

2. Reasonably supplement fresh air

根據廚房自然補風量、空調新風量，通盤考慮送風機的新風量。使補充新風與排煙風量匹配，以平衡排煙產生的負壓，使廚房?jī)?nèi)略有負壓，保證即使在冬天關閉室外門窗的情況下，當廚房門開啟時，流向廚房?jī)?nèi)有不大于3111/8的風速。

According to the natural make-up air volume of the kitchen and the fresh air volume of the air conditioner, the fresh air volume of the forced draft fan shall be considered comprehensively. Make the make-up fresh air and smoke exhaust air volume match to balance the negative pressure generated by smoke exhaust, so that there is a slight negative pressure in the kitchen, and ensure that even when the outdoor doors and windows are closed in winter, when the kitchen door is opened, there is no more than 3111/8 wind speed flowing into the kitchen.

3、控制溫度

3. Control temperature

根據廚房的工作環境要求標準，系統具有室內溫度調節的功能，各種不同的工作間可按實際需要控制室溫。

According to the working environment requirements of the kitchen, the system has the function of indoor temperature regulation, and various workplaces can control the room temperature according to actual needs.

4、新風凈化

4. Fresh air purification

補充的新風應該進行凈化與調溫處理，防止灰塵雜物混人廚房，污染食物。

The supplemented fresh air shall be purified and temperature regulated to prevent dust and sundries from mixing into the kitchen and polluting food.

5、凈化油煙消除噪音

5. Purify lampblack and eliminate noise

排出的油煙應該進行凈化處理，消除噪音，減少對環境的污染。

The lampblack discharged shall be purified to eliminate noise and reduce environmental pollution.

6、優化設計節能降耗

6. Optimize the design to save energy and reduce consumption

通過系統計算，要對系統流量、壓力、熱量等技術指標，進行平衡優化設計，使系統通風機工作在工況點上。采用分散控制、系統動態平衡設計，使系統具有節能降耗的功能。

Through system calculation, balance optimization design shall be carried out for system flow, pressure, heat and other technical indicators to make the system ventilator work at the optimal working point. Decentralized control and system dynamic balance design are adopted to enable the system to save energy and reduce consumption.